1】沸石转轮是一种吸附浓缩设备，他利用自身高吸附效率及脱附快的优势把高风量低浓度浓缩浓度浓缩成低风量高浓度的有机废气，从而降低设备投资费用和运行成本实现经济有机废气处理；

1】 Zeolite wheel is an adsorption concentration equipment that utilizes its advantages of high adsorption efficiency and fast desorption to concentrate high air volume and low concentration organic waste gas into low air volume and high concentration organic waste gas, thereby reducing equipment investment and operating costs to achieve economic organic waste gas treatment;

2】沸石转轮与固定床相比较可实现吸附-脱附-冷却连续运转。由耐热、耐腐蚀及耐磨性高的密封材料将沸石转轮分隔为三部分即大扇形和二个小扇形部分；大扇形部分为吸附区，可吸附有机物；二个小扇形部分分别为冷却区和高温脱附区。

2】 Compared with fixed beds, zeolite wheels can achieve continuous operation of adsorption desorption cooling. The zeolite impeller is divided into three parts, namely a large fan-shaped part and two small fan-shaped parts, by sealing materials with high heat resistance, corrosion resistance, and wear resistance; The large fan-shaped part is an adsorption zone that can adsorb organic matter; The two small fan-shaped parts are the cooling zone and the high-temperature desorption zone, respectively.

沸石转轮特征：

Characteristics of zeolite wheel:

1】沸石转轮使用寿命长，可用5-10年；

1】 The zeolite wheel has a long service life and can be used for 5-10 years;

2】吸附VOCs所产生的压降极低，降低了风机能耗；

2】 The pressure drop generated by adsorbing VOCs is extremely low, which reduces the energy consumption of the fan;

3】浓缩倍数数达5-30倍，节能高效，运行成本更低；

3】 The concentration factor can reach 5-30 times, which is energy-saving and efficient, with lower operating costs;

4】沸石转轮采用蜂窝构造，更高的比表面积使用无机材料，具有不燃特征；

4】 The zeolite wheel adopts a honeycomb structure, with a higher specific surface area using inorganic materials and non combustible characteristics;

5】经过浓缩后的废气吸附效率高，吸附效率≥90%，高可达98%以上，可达到国家及地区排放标准。

5】 After concentration, the exhaust gas has a high adsorption efficiency, with an adsorption efficiency of ≥ 90% and can reach over 98%, which can meet national and regional emission standards.

绿缘环境沸石转轮的优势：

Advantages of Zeolite Wheel in Green Edge Environment:

【1】产品孔径均匀，压差稳定低于600帕，降低了转轮堵孔的发生率；

【1】 The product has a uniform pore size and a stable pressure difference of less than 600 Pa, which reduces the occurrence rate of wheel blockage;

【2】特殊的烧结工艺，通过升温曲线的控制，使转轮模块强度提升10%，吸附容量提高20%-30%，脱附时间缩短20%左右，极大地提高了转轮的性能；

【2】 The special sintering process, through the control of the heating curve, increases the strength of the runner module by 10%, the adsorption capacity by 20% -30%, and the desorption time by about 20%, greatly improving the performance of the runner;

【3】提供与沸石转轮搭配的预处理、末端燃烧工艺的全系统技术支持。

【3】 Provide comprehensive technical support for pre-treatment and end combustion processes in combination with zeolite wheels.