中央木工除尘设备的设计：

Design of Central Woodworking Dust Removal Equipment:

1.在除尘设备出风口与风机的进口联接我们设计为软联接，以消除因风机高速运转带来的震动；在风机的出口设计有消声器，以降低因风机高速运转产生的噪声；

We have designed a soft connection between the air outlet of the dust removal equipment and the inlet of the fan to eliminate vibration caused by high-speed operation of the fan; A muffler is designed at the outlet of the fan to reduce the noise generated by high-speed operation of the fan;

2.为方便对除尘设备的检修与观察，我们在除尘设备灰斗下部设计有有机玻璃观察（检修）门；系统管道4-6米之间采用法兰连接，5m左右设计有检修门；便于观察管道里面粉尘沉降的情况及清理；

For the convenience of maintenance and observation of dust removal equipment, we have designed an organic glass observation (maintenance) door under the ash hopper of the dust removal equipment; The system pipeline is connected with flanges between 4-6 meters, and a maintenance door is designed around 5 meters; Easy to observe and clean the dust settling inside the pipeline;

3.针对木材粉尘的亲水特性，粉尘在有一定的水分的含量下容易结块，在除尘设备灰斗里面架拱成桥导致堵料现象，我们在除尘设备灰斗设计有振动器，进行辅助清灰，减少人工辅助清灰的工作；

3. In response to the hydrophilic characteristics of wood dust, dust is prone to clumping at a certain moisture content, which can cause blockage in the ash hopper of the dust removal equipment. We have designed a vibrator in the ash hopper of the dust removal equipment to assist in cleaning and reduce the need for manual cleaning;

4.除尘设备电气控制

4. Electrical control of dust removal equipment

通风除尘设备需要配套风机和空气压缩机，驱动需要三相四线制的电源，除尘设备清灰要配用1台脉冲控制仪。脉冲仪安装在除尘设备的附近。控制柜（箱）的电源由建设方提供相关。要求将电缆拉至控制柜内总开关上桩。同时请提供公共接地极，方便地线连接。

Ventilation and dust removal equipment requires supporting fans and air compressors, and the drive requires a three-phase four wire power supply. The dust removal equipment needs to be equipped with one pulse controller for dust cleaning. The pulse meter is installed near the dust removal equipment. The power supply for the control cabinet (box) shall be provided by the construction party. Request to pull the cable to the main switch in the control cabinet. Please also provide a common grounding electrode for easy connection of the ground wire.

5.针对木材粉尘浓度大的特点，除尘设备采用渐变的气流通道设计，保证气流均匀分布。对气流组织进行优化设计，避免对除尘设备内部局部区域高速冲刷与磨损。使清灰压缩空气做到所有滤袋均匀地喷吹与过滤，提高滤袋的整体寿命。

5. In response to the high concentration of wood dust, the dust removal equipment adopts a gradual airflow channel design to ensure uniform distribution of airflow. Optimize the design of airflow organization to avoid high-speed scouring and wear on local areas inside the dust removal equipment. Ensure that the compressed air for dust cleaning is evenly sprayed and filtered through all filter bags, thereby improving the overall lifespan of the filter bags.

6.防燃防爆，多重安全保障

6. Flameproof and explosion-proof, multiple safety guarantees

由于木工粉尘易燃易爆的特性，我们采用防静电装置、卸爆装置、脉冲防堵塞装置等有效设施，并安装有消防喷淋系统 为安全应急使用，确保设备长期安全运行；管道安装有启动清灰阀，能防止管道堵塞，保证管道顺畅。

Due to the flammable and explosive nature of woodworking dust, we have adopted effective facilities such as anti-static devices, explosion-proof devices, pulse anti blocking devices, and installed fire sprinkler systems for safe emergency use, ensuring the long-term safe operation of the equipment; The pipeline installation is equipped with a startup cleaning valve, which can prevent pipeline blockage and ensure smooth pipeline operation.

本文由中央除尘设备友情奉献.更多有关的知识请点击:http://www.tdyhhb.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from the Central Dust Removal Equipment For more information, please click: http://www.tdyhhb.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message