沸石转轮吸附浓缩+CO一体机是一种高效的废气处理设备，主要用于处理大风量、低浓度的有机废气。以下是对该设备的详细解析：

The zeolite rotary adsorption concentration+CO integrated machine is an efficient waste gas treatment equipment, mainly used for treating high air volume and low concentration organic waste gas. The following is a detailed analysis of the device:

一、设备概述

1、 Equipment Overview

沸石转轮吸附浓缩+CO一体机结合了沸石转轮的吸附浓缩功能和CO（催化氧化）处理单元，通过吸附-浓缩-脱附-催化氧化的连续过程，将低浓度的有机废气转化为高浓度气体，再进行催化燃烧处理，达到净化废气的目的。

The zeolite rotary adsorption concentration+CO integrated machine combines the adsorption concentration function of the zeolite rotary and the CO (catalytic oxidation) treatment unit. Through a continuous process of adsorption concentration desorption catalytic oxidation, low concentration organic waste gas is converted into high concentration gas, which is then subjected to catalytic combustion treatment to achieve the goal of purifying the waste gas.

二、工作原理

2、 Working principle

吸附浓缩阶段：

Adsorption concentration stage:

VOCs（挥发性有机化合物）废气首先通过前置过滤器，去除其中的颗粒物和杂质。

VOCs (volatile organic compounds) exhaust gas first passes through a pre filter to remove particulate matter and impurities.

净化后的废气进入沸石转轮的处理区，被转轮上的沸石吸附剂吸附，从而从空气中分离出来。

The purified exhaust gas enters the treatment area of the zeolite wheel and is adsorbed by the zeolite adsorbent on the wheel, thereby separating it from the air.

沸石转轮连续运转，将吸附的VOCs转移到再生区。

The zeolite wheel operates continuously to transfer the adsorbed VOCs to the regeneration zone.

脱附阶段：

Detachment stage:

在再生区，利用热空气（约180至250℃）对沸石进行吹扫，使吸附的VOCs脱附下来。

In the regeneration zone, hot air (about 180 to 250 ℃) is used to blow the zeolite and desorb the adsorbed VOCs.

脱附后的VOCs浓度被浓缩5至30倍，形成高浓度气体。

The concentration of VOCs after desorption is concentrated by 5 to 30 times, forming a high concentration gas.

催化氧化阶段：

Catalytic oxidation stage:

高浓度的VOCs气体进入CO处理单元，在催化剂的作用下，与氧气发生氧化反应，生成二氧化碳和水等无害物质。

High concentration VOCs gases enter the CO treatment unit and undergo oxidation reactions with oxygen under the action of catalysts, generating harmless substances such as carbon dioxide and water.

催化氧化过程高效且彻底，能够实现VOCs的高效去除。

The catalytic oxidation process is efficient and thorough, capable of achieving efficient removal of VOCs.

三、设备特点

3、 Equipment features

高效净化：通过吸附浓缩和催化氧化的组合工艺，能够高效去除大风量、低浓度的有机废气。

Efficient purification: By combining adsorption concentration and catalytic oxidation processes, it is possible to efficiently remove organic waste gases with high air volume and low concentration.

结构紧凑：设备设计紧凑，占地面积小，便于安装和维护。

Compact structure: The equipment design is compact, occupies a small area, and is easy to install and maintain.

操作简便：自动化程度高，操作简便，可实现远程监控和智能化管理。

Easy to operate: High degree of automation, easy to operate, capable of remote monitoring and intelligent management.

节能环保：利用热能回收技术，提高能源利用效率，降低运行成本。同时，催化氧化过程不产生二次污染，符合环保要求。

Energy conservation and environmental protection: Utilizing heat recovery technology to improve energy efficiency and reduce operating costs. At the same time, the catalytic oxidation process does not generate secondary pollution and meets environmental protection requirements.

四、应用领域

4、 Application Fields

沸石转轮浓缩+CO一体机广泛应用于印刷、涂装、化工、电子、制药等行业的大风量、低浓度有机废气处理领域。这些行业在生产过程中会产生大量的有机废气，对环境造成污染。采用沸石转轮浓缩+CO一体机进行处理，可以有效减少废气排放，保护生态环境。

The zeolite rotary concentrator+CO integrated machine is widely used in the fields of high air volume and low concentration organic waste gas treatment in industries such as printing, coating, chemical, electronics, and pharmaceuticals. These industries generate a large amount of organic waste gas during the production process, causing pollution to the environment. The use of zeolite wheel concentration+CO integrated machine for treatment can effectively reduce exhaust emissions and protect the ecological environment.